Each category page is a selection guide — temperature ratings, material and adhesive comparisons, and the questions our engineers ask before quoting. Start from your product type below.
Custom masking kits bundle the exact plugs, caps, tapes and die-cut shapes a specific part needs into one templated set - matched to your drawing so operators mask the same part the same way, every time, without guessing sizes on the line.
Die-cut masking dots, labels and custom shapes give repeatable, precise coverage for small masking areas, keep-out zones and identification — cut to your exact geometry rather than hand-trimmed from a roll.
Flame spray and thermal spray tape uses aluminum foil or other high-temperature backings to mask parts during thermal spray coating - a process that involves molten or semi-molten particle streams far hotter than powder coating or plating, common in aerospace and heavy industrial coating.
Conductive hanging hooks, lock bars and rotating accessories suspend parts through powder coating, liquid painting and other finishing lines — the hardware side of the masking process that keeps parts moving cleanly through the line.
Liquid and peelable maskants are brush-on or dip-applied temporary coatings that cure into a removable film.
Pre-taped films and temporary protection sheeting cover large flat areas quickly before painting, coating or assembly — cutting prep time versus taping panel edges by hand.
Paper, washi and fine-line tapes give sharp, clean color breaks on curved and contoured surfaces — the go-to choice for automotive refinishing, spray lines and any job needing precise, conformable edges.
Polyester (PET) masking tapes combine a heat-resistant film backing with a silicone adhesive system, giving clean release and sharp paint edges through powder coating and liquid painting ovens.
Polyimide (Kapton-type), PTFE and glass-cloth tapes handle the most demanding heat and precision masking jobs — PCB and electronics masking, plasma processes and process windows above what standard PET tape can survive.
Plastic, vinyl and rubber protective caps and tube plugs protect open ends, ports and pipe openings from contamination, damage and moisture during machining, coating, shipping and storage — a broader-duty cousin of masking plugs.
Rubber grommets and cable-entry seals sit at the intersection of masking and hole protection — sealing cable pass-throughs and openings where a soft, flexible seal is needed rather than a rigid plug.
Sandblasting and media blasting tape is a heavy, abrasion-resistant tape built to survive direct grit or bead impact during blast preparation - a different job entirely from spray or powder coating masking tape, which would be shredded in seconds under blast media.
Silicone masking caps cover studs, bolts, threaded posts and protruding features that need temporary protection during coating, plating or painting.
Silicone masking plugs are reusable, high-temperature stoppers used to protect threaded holes, cavities and blind bores during powder coating, e-coating, anodizing and plating.
Vent plugs and venting caps mask a hole while still letting air or gas escape during bake or cure cycles - preventing the pressure buildup that causes blow-out, bulging or trapped-air coating defects in sealed cavities.
Polyester & PET Masking Tapes
Green Polyester Powder Coating Masking Tape for powder coating and liquid painting work, with clean release and sharp paint edge.
Polyimide & Specialty High-Temperature Tapes
Amber Polyimide Masking Tape for PCB masking and powder coating work, with thin profile and high heat resistance.
Paper, Washi & Fine Line Masking
Green Rice Paper Fine Line Masking Tape for automotive refinishing and paint line masking work, with sharp line and easy conformability.
Paper, Washi & Fine Line Masking
Automotive PVC Fine Line Masking Tape for automotive painting and curve masking work, with curve control and good flexibility.
Masking Films & Surface Protection
Pre-Taped Masking Film for Painting for spray painting and automotive refinishing work, with fast coverage and large area protection.
Polyester & PET Masking Tapes
Green PET High Temperature Masking Tape for powder coating and thermal masking work, with dimensional stability and clean edge control.
Paper, Washi & Fine Line Masking
Automotive Spray Painting Masking Paper Tape for spray painting and automotive refinishing work, with easy tear and fast workshop use.
Polyester & PET Masking Tapes
Green PET PCB / Plating Masking Tape for PCB masking and plating lines work, with chemical resistance and clean edges.
Silicone Masking Plugs
Silicone Pull Plugs for Powder Coating for powder coating and thread masking work, with easy removal and reusable.
Silicone Masking Plugs
Silicone Pull Plugs for Painting for liquid painting and powder coating work, with fast handling and good sealing contact.
Silicone Masking Caps
Standard Silicone Masking Caps for stud masking and bolt masking work, with reusable and high heat resistance.
Silicone Masking Plugs
Standard Silicone Masking Plugs for plain hole masking and bore protection work, with straight profile and broad size range.
Silicone Masking Plugs
Chamfered Silicone Pull Plugs for powder coating and paint line masking work, with easier insertion and pull-tab removal.
Silicone Masking Caps
Silicone Caps and Plugs for Plain & Threaded Holes for plain hole masking and thread masking work, with mixed geometry options and custom…
Silicone Masking Plugs
High Temperature Silicone Grommet Plugs for powder coating and paint line masking work, with panel seating lip and heat resistance.
Die-Cut Shapes & Labels
Custom Die-Cut Polyimide Labels for SMT and PCB processing work, with high heat label stock and custom die-cutting.
Polyimide & Specialty High-Temperature Tapes
High Temperature Polyimide Tape Rolls for electronics masking and solder masking work, with high heat stability and thin carrier.
Die-Cut Shapes & Labels
Heat-Resistant Adhesive Cover Dots for small-area masking and surface cover-up work, with compact format and repeatable placement.
Masking Films & Surface Protection
Temporary Protection PE Film for surface protection and shipping protection work, with lightweight coverage and broad area use.
Polyester & PET Masking Tapes
Transparent PET High Temperature Masking Tape for high-temperature masking and process windows work, with transparent carrier and heat…
Polyester & PET Masking Tapes
Blue Polyester Process Positioning Tape for process positioning and fixture holding work, with clean peel and stable film carrier.
Polyimide & Specialty High-Temperature Tapes
PTFE Skived Film Tape for heat sealing and release surfaces work, with low friction and high heat resistance.
Polyimide & Specialty High-Temperature Tapes
Glass Cloth High Temperature Insulation Tape for electrical insulation and high-heat wrapping work, with strong cloth carrier and heat…
Polyimide & Specialty High-Temperature Tapes
Fiberglass Cloth Plasma Spray Masking Tape for plasma masking and thermal spray support work, with heavy-duty cloth carrier and spray…
Paper, Washi & Fine Line Masking
Purple Rice Paper Sharp Line Masking Tape for sharp line painting and automotive refinishing work, with sharp edge finish and clean peel.
Paper, Washi & Fine Line Masking
Orange Washi Automotive Masking Tape for automotive refinishing and paint edge control work, with good conformability and clean edges.
Paper, Washi & Fine Line Masking
Car Trim Edge Masking Tape for automotive trim masking and body shop edge work work, with perforated edge handling and trim-friendly…
Paper, Washi & Fine Line Masking
Flat Crepe Automotive Refinish Tape for automotive refinish and panel masking work, with flat paper profile and clean peel.
Masking Films & Surface Protection
Pre-Taped Blue Covering Film for paint prep and vehicle coverage work, with visible blue film and faster coverage.
Silicone Masking Plugs
Molded Silicone Rubber Seal Stoppers for hole sealing and paint line masking work, with molded sealing profile and reusable.
Silicone Masking Plugs
Multi-Purpose Silicone Hole Plugs for general hole masking and part protection work, with versatile geometry and broad size range.
Silicone Masking Caps
Rubber Screw Protection Caps for thread masking and paint protection work, with simple push-on fit and thread shielding.
Silicone Masking Caps
Rubber Bolt Protection Caps for bolt masking and paint protection work, with easy fit and impact protection.
Rubber Grommets & Seals
Cable Entry Rubber Grommets for cable pass-through and panel hole finishing work, with cable protection and edge cushioning.
Rubber Grommets & Seals
Top Hat Rubber Grommets for panel holes and wire protection work, with flanged profile and stable seating.
Protective Caps & Tube Plugs
PVC Open End Caps for pipe-end protection and tube protection work, with quick fit and dust shielding.
Protective Caps & Tube Plugs
Snap-On Dust Cap Plugs for dust protection and port coverage work, with snap-on fit and small-port protection.
Protective Caps & Tube Plugs
Threaded Plastic Pipe End Caps for thread protection and pipe-end coverage work, with threaded fit and secure retention.
Protective Caps & Tube Plugs
Hydraulic & Aircraft End Cap Plugs for hydraulic fitting protection and pneumatic ports work, with connector coverage and clean shipping…
Protective Caps & Tube Plugs
Soft Vinyl Push-In End Caps for small-end protection and tube finishing work, with soft touch and push-in fit.
Die-Cut Shapes & Labels
Thermal Transfer Polyester Labels for process labeling and batch tracking work, with printable face stock and durable PET carrier.
Die-Cut Shapes & Labels
Die-Cut Polyimide Masking Shapes for small-area high-heat masking and PCB masking work, with custom shape conversion and very high heat…
Hooks, Bars & Racks
General Powder Coating Hooks combine the mainstream C, V, CV, S and other wire-formed hanging styles used across most coating lines.
Hooks, Bars & Racks
Snap Hooks for Powder Coating clip onto rods or bars to create a more secure hanging point during coating and oven cure cycles.
Hooks, Bars & Racks
Spring Hooks for Coating Lines add spring-assisted retention for parts that need a more secure hang point during transport and cure.
Hooks, Bars & Racks
Lock Bars and Lock Hooks form a modular hanging system for repetitive finishing-line loading and rack organization.
Hooks, Bars & Racks
Swivel Wheel Hooks provide 360-degree access for coating larger parts without removing and re-hanging the workpiece.
Liquid & Peelable Maskants
Brush-applied peelable coating for irregular shapes and touch-up masking.
Liquid & Peelable Maskants
High-volume dip-applied maskant for consistent-geometry parts.
Sandblasting & Media Blasting Tape
Heavy-duty tape built to survive direct grit and bead blast impact.
Sandblasting & Media Blasting Tape
Extra-durability blasting tape for coarse grit and extended blast cycles.
Custom Masking Kits
Templated multi-component kit matched to your part drawing.
Custom Masking Kits
Combination kit pairing die-cut shapes with matched silicone plugs.
Vent Plugs & Venting Caps
Reusable vent plug preventing pressure buildup in sealed cavities.
Vent Plugs & Venting Caps
Cost-effective venting cap for lower-temperature plating and painting lines.
Flame Spray & Thermal Spray Tape
Foil-backed tape rated for flame spray and plasma spray particle heat.
Flame Spray & Thermal Spray Tape
Cost-effective alternative for lower-intensity thermal spray processes.
Send the process, peak temperature, feature dimensions and quantity — engineering matches the product before quoting.
Uploaded reference files are included with the inquiry. For larger CAD packages, reply to the confirmation email or send them here:
Our team typically replies within 24 business hours.